- Those pesky little pollen are very adept at invading your grinder! After enough use, they will find their way into every last crack and crevice they can. While you could clean them off, wouldn’t you rather catch them all?
- The small tool included with your grinder (technically known as a “Pollen Obliterator”) not only scoops up what you’ve collected but also acts as a safe cleaning tool. During the process below, remember this one simple rule: DO NOT SPILL POLLEN! Both Cheech and Chong would agree.
- 1. Place your grinder on a clean piece of white paper on a sturdy surface.
- 2. While staying over the white paper, disassemble your grinder.
- 3. For the lid and the shredder portions of the grinder, pollen tends to collect around the edges of the inside of the lid. Using the pollen obliterator, scrape off all of the pollen you can get to.
- 4. For the chamber, turn it upside down and tap it against the paper with some force a few times. Turn it right side up and repeat. Last, using the pollen tool (obliterator that is) to scrape along the threads where the chamber connects to the shredder.
- 5. For the pollen collector, scrape along the threads.
- 6. At this time, you likely have a dragon’s bounty of pollen on your piece of paper (we sure did). Take all grinder pieces off of the paper then fold the paper in half the long way. Pour the collected pollen into the pollen collector.
- (Step 7: Enjoy your reclaimed pollen! Victory is yours! You have gained 137 experience points. Level up!)
- Warning! Never use anything metal to clean your grinder… it will damage the grinder, void your warranty, and add metal to your herb. None of these things are good.
Leave a Reply
Share your insight with us!